10 ENGLISH
RADIO OPERATION
Listening to the radio
1
Select RADIO with FUNCTION.
The power is turned on and the previous tuned
station is received.
2
Press s BAND (or BAND on the remote)
repeatedly to select the desired band,
FM or AM.
3
Press r or t to tune in a station.
During FM stereo reception, “STEREO” is
displayed.
For quick tuning (Auto Search)
Hold down r or t until the tuner starts
searching for a station. When a station is tuned
to, the search stops.
If the broadcast signal is weak, it does not stop.
To stop the search manually, press r or t.
After listening, select TAPE/6STANDBY with
FUNCTION to turn the power off.
For better reception
FM AM
FM
Extend the telescopic antenna and orient it for the
best reception.
AM
The antenna is inside the player. Position the player
for the best reception.
Additional operations
VOLUME - Adjusts the volume.
T-BASS - Enhances low-frequency sound. Press to turn
it on or off.
REPEAT/MODE (or MODE on the remote) -
Reduces the FM noise. If an FM stereo broadcast
contains noise, press it so that “MONO” is displayed.
Noise is reduced, although reception is monaural.
To restore stereo reception, press the button again.
Note
If the unit picks up noise from other electrical
appliances nearby, like a TV or fluorescent lights, move
the unit.
To Next Page
Loading...
Need help?
General
