ENGLISH 11
Presetting radio stations
You can preset up to 15 stations in each band.
1
Select a station.
2
Press PROGRAM once so that
“PROGRAM” is displayed.
The station is stored in memory and the preset
number, beginning from “01” in consecutive order
for each band, is displayed for a few seconds.
3
Repeat steps 1 and 2 to store other
stations.
The next station will not be stored if a total of 15
preset stations have already been stored for a
band. (“P-FULL” will be displayed.)
To listen to preset stations
Select a band then press E PRESET (or E on the
remote) repeatedly.
To select a preset number directly with the
remote
Press the number buttons 1-9 and 0/10.
When selecting a preset number over 10, press >10
first, then the corresponding number buttons.
Example:
To select number 15, press >10 first, then 1 and 5.
To select number 10, press 0/10. (or >10 first, then 1
and 0/10.)
To clear a preset station
Select the preset number first. Then hold down
PROGRAM so that “PROGRAM” in the display
disappears.
The higher numbers in the band are decreased by one.
To Next Page
Loading...
