Aiwa CX-ZL100 User Manual

SERVICE MANUAL
DATA
COMPACT DISC STEREO
CASSETTE RECEIVER
BASIC TAPE MECHANISM : ZZM-2 PR1NM
BASIC CD MECHANISM : AZG-1 ZD8RN1DM
Z-L100 EZ,K
S/M Code No. 09-004-422-5R2
REVISION
• If requiring information about the CD mechanism, see Service Manual of AZG-1,
(S/M Code No. 09-001-335-3N6).
• This Service Manual is the “Revision Publishing” and replaces “Simple Manual”
Z-L100 (EZ,K), (S/M Code No. 09-002-422-5T2).
Z-L100
SPEAKER
SYSTEM
CD
CASSEIVER
SX-ZL100
CX-ZL100
(TYPE : EZ)
RC-ZAS02
STEREO
TURNTABLE
CX-ZL100
(TYPE : K)
REMOTE
CONTROLLER
-
PX-E860
• If requiring information about the Stereo Turntable, see Service Manual of
PX-E860 (K), (S/M Code No. 09-993-322-0R4).
All manuals and user guides at all-guides.com
all-guides.com

Aiwa CX-ZL100 Specifications

General

CD Player	Yes
MP3 Playback	Yes
Remote Control	Yes
Display	LCD
Tuner	FM/AM

Summary

SPECIFICATIONS

Amplifier section

Specifications for the amplifier section including power output and distortion.

Compact disc player section

Specifications for the CD player section including laser and D-A converter.

Cassette deck section

Specifications for the cassette deck section including track format and heads.

Speaker system SX-ZL100

Specifications for the SX-ZL100 speaker system including cabinet type and speakers.

PROTECTION OF EYES FROM LASER BEAM DURING SERVICING

Precaution to replace Optical block

Precautions for replacing the optical block, including static discharge and handling.

NOTE ON BEFORE STARTING REPAIR

Forced discharge of electrolytic capacitor of power supply block

Procedure for safely discharging power supply capacitors before repair.

Check items before exchanging the MICROCOMPUTER

Checks to perform before replacing the microcomputer to confirm defect.

Regarding reset

Procedure for forced-resetting the microcomputer to check its functionality.

Confirmation of soldering state of MICROCOMPUTER

Checking the soldering state of the microcomputer to rule out connection issues.

WIRING - 1 (MAIN)

SCHEMATIC DIAGRAM - 1 (MAIN 1/2)

SCHEMATIC DIAGRAM - 2 (MAIN 2/2)

WIRING - 2 (FRONT)

SCHEMATIC DIAGRAM - 3 (FRONT)

WIRING - 3 (PT)

SCHEMATIC DIAGRAM - 4 (PT)

WIRING - 4 (DECK)

IC BLOCK DIAGRAM

IC DESCRIPTION

ADJUSTMENT <TUNER / DECK / FRONT>

DC Balance / Mono Distortion Adjustment

Adjust DC balance and mono distortion using test points.

SPEAKER DISASSEMBLY INSTRUCTIONS

Type.1

Type.2

Type.3

How to Remove the PANEL, FR

How to Attach the PANEL, FR