Need help?Do you have a question about the AJA GEN10 and is the answer not in the manual?
Visual representation of the device's side panel and connections.
Explains the function of the DIP switches for configuration.
Configures outputs 1-4 for SD or HD sync signals.
Configures outputs 5-6 for SD or HD sync signals.
Sets SD output type and AES output mode (silence/tone).
Selects between NTSC (59.94/60Hz) and PAL (50Hz) frame rates.
Visual representation of the device's side panel and connections.
Explains the function of the DIP switches for configuration.
Configures outputs 1-4 for SD or HD sync signals.
Configures outputs 5-6 for SD or HD sync signals.
Sets SD output type and AES output mode (silence/tone).
Selects between NTSC (59.94/60Hz) and PAL (50Hz) frame rates.
General| Supported video modes | 525i, 720p, 1080i, 1080p |
|---|---|
| Maximum video resolution | 1920 x 1080 pixels |
| Product color | Grey, Silver |
| Input voltage | 5 - 18 V |
| Power consumption (typical) | 2 W |
Weight and Dimensions| Depth | 25 mm |
|---|---|
| Width | 147 mm |
| Height | 79 mm |
To Next Page