Why am I getting dropped frames during playback on AJA Computer Hardware?
If you are experiencing dropped frames during playback with your AJA Computer Hardware, it could be due to several reasons. First, try disabling any virus-checking software running in the background. If the Canvas/Viewer zoom setting exceeds the fit-to-window setting, change it to 'Fit-to-Window'.
Why are frames dropping during playback on my AJA KONA LHe Plus?
If you are experiencing dropped frames during playback with your AJA Video Card, it could be due to several reasons. First, ensure that your Canvas/Viewer zoom setting is set to 'Fit-to-Window'. Another potential cause is virus checking software running in the background; try disabling it. Other causes may be related to RAID configuration, sequence settings, or scratch drive settings.
How to fix AJA PCI Card not capturing media from external device?
If media is not being captured from your desired external device with your AJA PCI Card, check the settings in the Input tab of the KONA 3 Control Panel application. Also, verify the equipment cables are properly connected.
What to do if AJA PCI Card is dropping frames during playback?
If your AJA PCI Card is dropping frames during playback, it could be due to several reasons. One reason could be that virus checking software is running in the background; if so, disable it. Other potential causes include: * The Canvas/Viewer zoom setting exceeds the fit-to-window setting: Change to 'Fit-to-Window.' * RAID cannot sustain the data rate of the clip/ sequence. * The sequence setting does not match the 'playback output setting' found at FCP Audio/ Video Settings -> AV Output. * Scratch drive not set to the RAID.
What to do if AJA PCI Card is dropping frames during record?
If your AJA PCI Card is dropping frames during record, it might be due to virus checking software running in the background. Try disabling it. Also, ensure the scratch drive is set to the RAID and that the RAID can sustain the data rate of the capture preset codec.
What causes a red render bar on AJA KONA LHe Plus Video Card?
A red render bar appearing when placing a clip on a sequence with your AJA Video Card indicates that the sequence setting does not match the clip setting.
Why does my AJA Video Card video stutter during playback?
Video stutter during playback with the AJA Video Card can happen if the RAID cannot sustain the data rate.
How to reset Final Cut configuration for AJA KONA LHe Plus?
If changes to Final Cut’s configuration aren’t being remembered, or you need to force a change with your AJA Video Card, initialize Final Cut Pro back to the factory default state by locating Final Cut’s preference file and discarding it.
Why is the video output black on my AJA KONA LHe Plus?
A black video output on your AJA Video Card can occur if the external video is set to 'No Frames' (View -> External Video) or if the 'Playback output setting' found at FCP Audio Video Settings -> AV Output is set to 'none' or to a non-KONA 3 device.
Why is video frozen during playback on my AJA KONA LHe Plus Video Card?
If the video in the canvas stays frozen during playback on your AJA Video Card, it could be because the sequence setting does not match the 'playback output setting'. Alternatively, the Canvas/Viewer zoom setting may exceed the fit-to-window setting. Change to 'Fit-to-Window'.
General| Category | Video Card |
|---|---|
| Audio I/O | 16 channels |
| Maximum Frame Rate | 60 fps |
| Power Consumption | 25W |
| Video Input | HDMI, SDI, Component, Composite, S-Video |
| Video Output | HDMI, SDI, Component, Composite, S-Video |
| Audio Input | Embedded audio, Analog audio |
| Audio Output | Embedded audio, Analog audio |
| Supported Formats | SD, HD, 2K |
| PCIe Interface | PCIe 2.0 |
| Supported Operating Systems | Windows, macOS, Linux |
| Form Factor | Full-height, half-length |
Lists registered and unregistered trademarks of AJA Video Systems and other entities.
Outlines copyright information and usage restrictions for the manual.
Provides contact methods for AJA support and sales.
Introduces the AJA KONA series and the manual's scope.
Lists the specific KONA models detailed in the manual.
Describes AJA's software package including drivers and control panel.
Discusses disk storage requirements for real-time uncompressed media.
Details the features of KONA 4 and 3G cards, including Video I/O.
Lists video input/output capabilities for KONA LHe Plus.
Describes hardware-based down-conversion for KONA LHe Plus.
Details analog and digital audio I/O for KONA LHe Plus.
Lists video input/output capabilities for KONA LHi.
Describes hardware-based down-conversion for KONA LHi.
Details analog and digital audio I/O for KONA LHi.
Describes breakout cable connectors for KONA LHi and LHe Plus.
Details the KONA KL-Box breakout box for LHe Plus models.
Describes SDI and HDMI connectors for LHe Plus/LHi.
Provides a summary of the KONA card installation and setup steps.
Describes the AJA System Test utility for performance evaluation.
Lists the items included in the KONA shipment.
Details the specific cables provided with KONA 4 or 3G.
Instructions for downloading and installing AJA KONA software from the website.
Guides on using KONA with third-party video/audio applications.
Lists supported file formats for recording with KONA.
Introduces the AJA Control Panel software for configuring KONA hardware.
Explains the visual representation of signal flow and processing in the Control Panel.
Describes saving and recalling custom Control Panel configurations as presets.
Details how user and administrator preferences are managed.
Explains the Control screen for managing KONA's video output and timing.
Describes routing selected input video through the card for processing or output.
Allows outputting preset test patterns or custom graphics when no application is active.
Covers Genlock synchronization and output timing adjustments.
Explains settings for primary and secondary video formats and conversion.
Details video and audio input selection and mapping.
Configures HDMI output protocol, color space, and audio channels.
Sets primary/secondary formats and color levels for analog output.
Adjusts analog black level and progressive format settings.
Configures audio gain and delay settings.
Manages software-based pulldown and conversion settings for Mac.
Steps for creating and uploading custom Look-Up Tables (LUTs).
Details the format required for custom LUT text files.
Selects timecode streams for applications and monitoring.
Configures timecode burn-in and offset for video output.
Explains how to copy and use presets on different workstations.
Discusses 4K mode operations, including Quadrant mode.
Explains how KONA 4/3G handles 4K video in quadrant transport mode.
Details configuring SDI connectors for 4K input/output in capture applications.
Notes that the Downstream Keyer is not available in 4K Mode.
Instructions for switching between Standard and 4K firmware modes.
Explains how to use multiple AJA products with the Control Panel application.
Compares the quality and characteristics of 8-bit and 10-bit video.
Provides a structured approach to diagnosing and resolving issues.
Offers guidance on contacting AJA support for assistance.
Lists detailed technical specifications for the KONA 4 card.
Details FCC compliance statements and warnings for Class B digital devices.
Lists conformance standards met by the equipment, including EMC directives.
KCC compliance statement for broadcasting equipment.
BSMI CNS 13438 compliance statement.
VCCI compliance statement for radio/television receivers.
Presents general warnings and instructions for safe operation.
Outlines the terms and conditions of the product's limited warranty.
To Next Page
