If the external detector is actuated, you will receive a notication.
Detector Maintenance and Battery Replacement
Check the operational capability of the DoorProtect detector on a regular basis.
Clean the detector body from dust, spider web and other contaminations as they
appear. Use soft dry napkin suitable for equipment maintenance.
Do not use any substances containing alcohol, acetone, gasoline and other
active solvents for cleaning the detector.
The battery lifetime depends on battery quality, actuation frequency of the
detector and ping interval of the detectors by the hub.
If the door opens 10 times a day and the ping interval is 60 seconds, then
DoorProtect will operate up to 7 years from the pre-installed battery. Setting the
ping interval of 12 seconds, you will reduce the battery life to 2 years.
If the detector battery is discharged, you will receive a notication, and the LED
will smoothly light up and go out, if the detector or tamper is actuated.
How long Ajax devices operate on batteries, and what affects this
Battery Replacement
To Next Page
Loading...
Need help?
General
