AJAX Fire Protect User Manual (English)

To Next Page

Fire Protect User Manual

Fire Protect is a wireless indoor fire detector with an in-built buzzer and a

battery, ensuring up to 4 years of autonomous operation. Fire Protect can

detect smoke and rapid temperature increase.

Connecting to the Ajax security system via a secured Jeweller radio

protocol, Fire Protect (Fire Protect Plus) communicates with the hub at a

distance of up to 1,300 m in line of sight.

The detector can be a part of third-party security systems, connecting to

them via the Ajax uartBridge or Ajax ocBridge Plus integration module.

The detector is set up via the Ajax apps for iOS, Android, macOS, and

Windows. The system notifies the user of all events through push

notifications, SMS, and calls (if activated).

The Ajax security system can be connected to a central monitoring station

of a security company.

Need help?

Do you have a question about the AJAX Fire Protect and is the answer not in the manual?

AJAX Fire Protect Specifications

General

Smoke-sensitive element	Photoelectric sensor
Temperature sensitive element	Thermocouple
Tamper protection	Yes
Compatibility	Operates independently or with Hub, Hub Plus, Hub 2, ReX, ocBridge Plus, uartBridge
Sound notification volume	85 dB at a distance of 3 m
Alarm threshold at the temperature	+59°С ±2°С
Operating temperature range	From 0°С to +65°С
Operating humidity	Up to 80%
Frequency band	868.0 – 868.6 MHz or 868.7 – 869.2 MHz depending on the region of sale
Radio signal modulation	GFSK
Radio signal range	Up to 1, 300 m (any obstacles absent)
Maximum RF output power	Up to 20 mW
Power supply	2 × CR2 (main batteries), CR2032 (backup battery), 3 V
Battery life	Up to 4 years