Primary Detector The primary detector status
External Contact
The status of the external detector connected
to DoorProtect
Always Active
If the option is active, the detector is always in
armed mode and noties about alarms
Chime
When enabled, a siren noties about opening
detectors triggering in the Disarmed system
mode
Temporary Deactivation
Shows the status of the device temporary
deactivation function:
Firmware The detector rmware version
Device ID The device identier
Device No. Number of the device loop (zone)
Learn more
What is chime and how it works
No — the device operates normally and
transmits all events.
Lid only — the hub administrator has
disabled notications about triggering on
the device body.
Entirely — the device is completely excluded
from the system operation by the hub
administrator. The device does not follow
system commands and does not report
alarms or other events.
By number of alarms — the device is
automatically disabled by the system when
the number of alarms is exceeded (specied
in the settings for Devices Auto
Deactivation). The feature is congured in
the Ajax PRO app.
By timer — the device is automatically
disabled by the system when the recovery
timer expires (specied in the settings for
Devices Auto Deactivation). The feature is
congured in the Ajax PRO app.
To Next Page
Loading...
Need help?
General
