Settings
To change the detector settings in the Ajax app:
Setting Value
First eld
Detector name that can be changed. The name
is displayed in the text of SMS and notications
in the event feed.
The name can contain up to 12 Cyrillic
characters or up to 24 Latin characters
Room
Selecting the virtual room to which DoorProtect
is assigned. The name of the room is displayed
in the text of SMS and notications in the event
feed
Delay When Entering, sec
Selecting delay time when entering. Delay when
entering (alarm activation delay) is the time you
have to disarm the security system after
entering the room
Delay When Leaving, sec
Selecting the delay time when exiting. Delay
when exiting (alarm activation delay) is the time
you have to exit the room after arming the
security system
Arm in Night Mode
If active, the detector will switch to the armed
mode when using the night mode
Night Mode Delay When Entering, sec The time of Delay When Entering in the Night
1. Select the hub if you have several of them or if you are using the PRO app.
2. Go to the Devices tab.
3. Select DoorProtect from the list.
4. Go to Settings by clicking on the .
5. Set the required parameters.
6. Click Back to save the new settings.
What is delay when entering
What is delay when leaving