mode. Delay when entering (alarm activation
delay) is the time you have to disarm the
security system after entering the premises.
Night Mode Delay When Leaving, sec
The time of Delay When Leaving in the Night
mode. Delay when leaving (alarm activation
delay) is the time you have to exit the premises
after the security system is armed.
Alarm LED indication
Allows you to disable the ashing of the LED
indicator during an alarm. Available for devices
with rmware version 5.55.0.0 or higher
Primary Detector
If active, DoorProtect primarily reacts to
opening/closing
External contact
If active, DoorProtect registers external detector
alarms
Always Active
If the option is active, the detector is always in
armed mode and noties about alarms
Alert with a siren if opening detected
If active, added to the systemare
activated when the opening detected
Activate the siren if an external contact opened
If active, added to the systemare
activated during an external detector alarm
Chime settings
Opens the settings of Chime.
Jeweller Signal Strength Test Switches the detector to the Jeweller signal
strength test mode. The test allows you to
check the signal strength between the hub and
DoorProtect and determine the optimal
installation site
What is delay when entering
What is delay when leaving
How to nd the rmware version or
the ID of the detector or device?
Learn more
sirens
sirens
How to set Chime
What is Chime
To Next Page
Loading...
Need help?
General
