AJAX MotionCam - Page 23

Event
Indication
Turning on
Lights up green while the device is
turning on
Turning off
Lights up red, then flashes three times
Active detector indication
Event
Indication
Note
Connecting the detector
to the hub
Lights up green for a few
seconds
Hardware error
Flashes red
The detector needs to be
repaired, please contact
Support Service
Alarm or tamper
activation
Lights up green for about
1 second
Battery replacement
needed
Slowly lights up/goes out
green when an alarm is
raised
For battery replacement
procedure, see Battery
Replacement manual