AJAX MotionCam User Manual

Operating Principle
The infrared sensor of MotionCam detects intrusion into the secured
premises by identifying moving objects with a temperature close to that of
the human body. The temperature compensation function makes the detector
effective inside premises with temperature ranging from 0 to +40°C. If
placed and adjusted properly, MotionCam ignores pets.
When movement is detected, the armed detector instantly transmits an
alarm signal to the hub. The hub activates the connected sirens and notifies
the user and the security company. MotionCam uses Jeweller radio protocol
to transmit alarms and events to the hub.
The built-in MotionCam camera can take from 1 to 5 shots with the
resolution of 320×240 and up to 3 shots with the resolution of 640×480
pixels. A series of photos is displayed in the app as an animation, so the
user is able to evaluate the unfolding of the event over time. Photos are
available both in Ajax apps and on the Central Monitoring Station software
of the security company. MotionCam uses Wings radio protocol to transmit
photos to the hub.

AJAX MotionCam Specifications

General

Camera	Yes
Dimensions	135 × 70 × 60 mm
Tamper alarm	Yes
Photo verification	Yes
Weather Resistance	No
Weight	167 g
Detection distance	12 meters
Pet immunity	Up to 50 cm
Communication range	1, 700 meters (open space)
Installation	Indoor
Operating temperature range	From -10°C to +40°C
Operating humidity	Up to 75%
Power supply	CR123A battery
Detection angle	88.5° horizontal, 80° vertical
Image resolution	640 × 480 pixels
Time to deliver photo alarm	9 s
Connectivity	Jeweller
Field of View	88.5° horizontal, 80° vertical
Night Vision	Yes
Compatibility	AJAX hubs