SmartBracket, check the tamper status in the Ajax app and then check if it
fits tightly onto the attachment panel.
Do not install the detector:
● outdoors;
● facing the window to avoid exposing the detector lens to direct
sunlight;
● opposite any objects with the rapidly change temperature (e.g.
opposite electric or gas heaters);
● opposite any moving objects with the temperature close to that of the
human body (opposite swaying curtains above the heater);
● in places with fast air circulation (next to fans, open windows or
doors);
● near metal objects and mirrors that cause the attenuation or interfere
with radio signals;
● inside rooms with temperature and humidity beyond the permissible
limits;
● closer than 1 meter to a hub.
Maintenance
Check the operability of the detector on a regular basis. Clean the detector
body from dust, cobwebs, and other contaminants as they emerge. Use a
soft dry cloth suitable for equipment care.
Do not use substances that contain alcohol, acetone, gasoline or other
active solvents to clean the detector. Wipe the lens very carefully — any
scratches on the plastic may impair the detector sensitivity.
To Next Page
Loading...