AJAX MotionCam User Manual

SmartBracket:
2. Attach the detector to the mounting panel. As soon the detector is
fixed in SmartBracket, its LED blinks once to signal that the tamper on the
detector has been triggered.
Double-sided adhesive tape should be used only for the temporary
installation of the detector. The tape dries up over time, which may result in
the falling of the detector and triggering of the security system. Moreover,
the device may fail if hit.
If the detector’s LED doesn’t light up after the device is attached to the

AJAX MotionCam Specifications

General

Camera	Yes
Dimensions	135 × 70 × 60 mm
Tamper alarm	Yes
Photo verification	Yes
Weather Resistance	No
Weight	167 g
Detection distance	12 meters
Pet immunity	Up to 50 cm
Communication range	1, 700 meters (open space)
Installation	Indoor
Operating temperature range	From -10°C to +40°C
Operating humidity	Up to 75%
Power supply	CR123A battery
Detection angle	88.5° horizontal, 80° vertical
Image resolution	640 × 480 pixels
Time to deliver photo alarm	9 s
Connectivity	Jeweller
Field of View	88.5° horizontal, 80° vertical
Night Vision	Yes
Compatibility	AJAX hubs