AJAX MotionCam User Manual

MotionCam User Manual
MotionCam is a wireless motion detector with visual alarm verification for
indoor use. It operates for up to 4 years on bundled batteries, detects
movement at up to 12 meters, ignores animals, but recognizes a human
move instantly. MotionCam works within Ajax security systems, connecting
to a hub through the two secure radio protocols. The detector uses Jeweller
to transmit alarms and events, and Wings to transmit photos. Wireless
coverage may reach up 1,700 m line-of-sight.
The detector is compatible only with Hub 2. Connection to Hub, Hub
Plus, ReX radio signal range extender, ocBridge Plus and uartBridge
integration modules is not supported!
The detector is configured via iOS, Android, macOS, and Windows-based
Ajax apps. Users are alerted of all alarms and events via push notifications,
SMS, and calls (if enabled).

AJAX MotionCam Specifications

General

Camera	Yes
Dimensions	135 × 70 × 60 mm
Tamper alarm	Yes
Photo verification	Yes
Weather Resistance	No
Weight	167 g
Detection distance	12 meters
Pet immunity	Up to 50 cm
Communication range	1, 700 meters (open space)
Installation	Indoor
Operating temperature range	From -10°C to +40°C
Operating humidity	Up to 75%
Power supply	CR123A battery
Detection angle	88.5° horizontal, 80° vertical
Image resolution	640 × 480 pixels
Time to deliver photo alarm	9 s
Connectivity	Jeweller
Field of View	88.5° horizontal, 80° vertical
Night Vision	Yes
Compatibility	AJAX hubs