At the same time, an alarm is transmitted within 0.15 s.
Pairing the Detector with the hub
Before you start pairing the detector:
1. Turn on the hub and check the Internet connection (via Ethernet
cable and/or GSM network).
2. Install the Ajax app on your smartphone. Create an account, add the
hub to the app, and create at least one room.
3. Check the status of the hub in the app to make sure it is disarmed
Please note that only a user with admin permissions can add devices to the
hub.
To connect the detector:
1. In the Ajax mobile app, tap Add Device.
2. Name the device, scan or enter manually the QR code (placed on the
back of the detector body or its packaging), select the room for placement.
3. Click Add. The countdown will start.
To Next Page
Loading...