16
3 kHz can be successfully used on non-trashy areas to search for both ferrous and non-ferrous targets
as well as the spoils of war.
7 kHz –Is the average universal frequency for a wide range of applications. You can search for both
medium and small coins as well as the spoils of war. This frequency is convenient for terrain
reconnaissance.
14 kHz - Frequency optimized for small and medium-sized coins especially when the latter are
located on edge. This frequency is the best choice for hunting on the saltwater beach.
18-22kHz - are dedicated for small gold or mixed metals in highly trashed area
PARAMETER MENU
By pressing the MENU button you have access to a number of additional parameters, which are
divided into 3 groups. Navigating the menu by using the buttons , + - and OK.
The value in the upper-right corner ([1] on the screen above) of the screen indicates the user
program number that you are currently editing.
SEARCH OPTIONS
Conv. Search. [Normal. (Normal), MM (metal trash), AF1 (Filtering algorithm), AF2, AF3] These
options are designed to optimize the operation of the device under normal conditions, under various
degrees of trash within the search area, as well as under various amounts of electromagnetic
interference.
Trashy is defined as an area where the distance between small metal objects (nails) is 1/2 the
diameter of the coil.
To work in these areas use the MM. Otherwise, we recommend you use the mode "Normal.”
To Next Page
Loading...
