Akai 1730-SS User Manual

REC/FB.
Left
RIGHT
REC/PO.
LEFT
{
EXTERNAL
SPEAKERS
1
LINE INPUT
————
tine
eur ———!
Fig. 22
@
DIN
JACKS
The DIN JACKS at the rear of the recorder
are for use in inter-connecting Model 1730-SS
with
an
external
stereo
amplifier.
This
system
enables
easy
recording
and
playback
through
an
external
amplifier
as
the
complex
connec-
tion or disconnection of several separate plugs
is not necessary.
An
AKAI
DR-!11
DIN
Connection
Cord
has
been
included
in the
standard
accessories
for
your
convenience,
HB
MONITORING
For monitoring, connect Stereo Headphones to
Front or Rear STEREO HEADPHONE
JACK. Stereo Headphones should be of 82
impedance type, ARAL Model ASE-22 is highly
recommended,
10-TAPE SPLICING AND
EDITING
Cut tape diagonally with an overlap so that
the ends are lined up (cutting tape on diagonal
eliminates detection of the splice in recording).
Cover aligned ends with SPLICING TAPE.
Press firmly, exerting pressure to secure ends
evenly, Trim off excess splicing tape (Cut into
recording tape very slightly as illustrated by
dotted lines. This eliminates the possibility of
a sticky splice). Splicing of tape using scissors
requires skillful work. With our specially
designed PORTABLE SPLICER, splicing can
be done very smoothly.

Akai 1730-SS Specifications

General

Brand	Akai
Model	1730-SS
Category	Tape Deck
Language	English