Akai 1730-SS

11-HEAD CLEANING
Tape Oxide/Dust Deposits Cause 90% of
Tape Recording Failures
For quality performance it is imperative that
tape recorder heads be kept clean at all times.
Dust and magnetic particles from the tape
tend to deposit on the heads after prolonged
use of the recorder. This results in poor head-
to-tape contact deteriorating sound quality and
sensitivity. Such dust causes drastic drops in
recording/playback levels and nullifies high
quality sound,
Make it a rule to clean the heads every time
your
use
your
recorder,
AKAT's
Head
Cleaning
Kit Model HC-500 is recommended for remov-
ing
foreign
matter
deposited
on
the
heads.
Note:
Set
Playback/Rec
Lever
to
PLAY
position
while
cleaning
the
heads.
EXAMPLE
CLEAN
HEAD
Frequency
response
curve