Need help?Do you have a question about the Akai 1730-SS and is the answer not in the manual?
General| Type | Stereo Tape Deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Motor | 2-speed hysteresis synchronous |
| Total Harmonic Distortion | 1.5% |
| Reel Size | 7 inch |
| Heads | 3 (erase, record, playback) |
| Tape Speed | 1 7/8, 3 3/4, 7 1/2 ips |
| Frequency Response | 30 Hz to 20 kHz |
| Wow and Flutter | 0.08% at 7½ ips |
| Semiconductors | Transistors and Diodes |
Detailed technical specifications for the AKAI 1730-SS tape recorder, including track system, speeds, and response.
Identifies and describes the various controls located on the front panel of the AKAI 1730-SS tape recorder.
Identifies and describes the connectors and switches on the rear panel of the AKAI 1730-SS.
Explains AKAI's 4-channel surround stereo system and its advantages over 2-channel stereo.
Details the 4-track system and how to select 4-channel or 2-channel stereo recording/playback.
Instructions for setting the voltage and cycle conversion switches for global operation.
How to select the correct tape speed (3-3/4 and 7-1/2 ips) for recording and playback.
Explains the use of the pause lever for temporarily stopping tape movement during recording or playback.
Details the automatic shut-off feature that cuts power when the tape end is reached or broken.
Instructions for using the fast forward and rewind lever for rapid tape selection.
General instructions and checks required before performing playback operations on the tape recorder.
Steps to set up and perform 4-channel surround stereo playback using external amplifiers.
Steps to set up and perform 2-channel stereo playback, including handling reel inversion for tracks 2-4.
Pre-operation checks and general guidelines for recording audio onto tape with the AKAI 1730-SS.
Detailed steps for recording in 4-channel surround stereo, including microphone setup and level balancing.
Steps for performing conventional 2-channel stereo recording, including microphone placement and reel inversion.
How to connect external audio sources for both 4-channel and 2-channel stereo recording via line inputs.
Explains DIN jacks for amplifier connection and headphone monitoring for audio playback.
Step-by-step guide on how to splice and edit audio tapes using an overlap method for clean cuts.
Importance and procedure for cleaning tape recorder heads to maintain sound quality.
Explains the need for and process of demagnetizing tape heads to prevent performance degradation.
How to erase recorded signals from tape, either automatically or using specific erase heads.
A chart listing common conditions and their possible causes and solutions, excluding mechanical failures.
Information regarding the lubrication of the tape recorder's motor and the recommendation for professional service.
Lists the standard accessories included with the AKAI 1730-SS tape recorder.
Lists optional accessories available for purchase to enhance the functionality of the tape recorder.
To Next Page
