Need help?Do you have a question about the Akai 1710 and is the answer not in the manual?
Details procedures for measuring tape speed deviation, wow and flutter, THD, signal-to-noise ratio, and output.
Explains how the motor drives the capstan via a belt and flywheel for stable rotation.
Describes how the pinch roller presses against the capstan to move the tape at rated speed.
Details the mechanism for engaging the pinch roller and driving the take-up reel during record/play.
Explains how the mechanism engages for fast winding of the tape onto the take-up reel.
Details how the mechanism engages for fast rewinding of the tape onto the supply reel.
Describes how brake rollers engage to stop reel rotation.
Explains the lever and switch mechanism that selects between record and playback modes.
Details alignment and pressure adjustment for the pinch wheel.
Covers alignment and pressure adjustment for the take-up idler wheel.
Details alignment and pressure adjustment for the rewind idler wheel.
Explains pressure adjustment for the intermediate wheel.
Describes friction adjustment for the take-up reel table and drive wheel felt clutches.
Details friction adjustment for the supply reel table and rewind drive wheel felt clutches.
Explains vertical azimuth alignment of the tape head.
Describes how to measure and set the recording bias frequency.
Details measuring and adjusting the recording bias voltage.
Explains how to measure and adjust the erasing bias voltage.
Describes how to set the recording level using the VU meter.
Provides a schedule and guidelines for lubricating moving parts.
Details the cleaning process for tape heads and other critical components.
Guides on diagnosing and resolving playback issues with the amplifier.
Guides on diagnosing and resolving recording issues with the unit.
Provides solutions for mechanical issues related to tape movement.
To Next Page
General
