Akai 4000DS Mk-II Service Manual

ELECTRICAL PARTS LIST TABLE
Because (he indication of resistors
and capacitors in the P. C. Board
photos are being eliminated.please
confirm parts name and shape by
comparing (hem with the parts
shown in this table.
Solid Resistor
Cement Resistor
Wire-Wound Resistor
'd
MP Capacitor (Tublcr Type)
Plastic Capacitor
M
f
Mylar Capacitor
Tantalum Capacitor
I.
I'erri Inductor
Stopper Type | 3
Insulator Type
Carbon Resistor
1
Thermistor
Mylar Capacitor
Oil Capacitor (Tubler Type)
11
ft
Ceramic Capacitor
Onset?
3 r
Enamel Resistor
*
VFM (HIQ) Capacitor
Tubler Type
Vertical Type
fs
V 4
‘ « II
Slyrol Capacitor
12
Mctalized Mylar (Paper) Capacitor
f ?I
n®
©l#AffM
Transistor

Akai 4000DS Mk-II Specifications

General

Type	Reel to Reel
Track System	4-track, 2-channel, stereo/monaural system
Signal to Noise Ratio	50dB
Reel Size	Up to 7 inch reel
Total Harmonic Distortion	1.5%
Output	0.775V (line)
Tape Speed	3.75 & 7.5 ips
Heads	1 x erase
Input Sensitivity	50mV (line)
Semiconductors	6 x Transistors
Inputs	Line
Outputs	Line