Need help?Do you have a question about the Akai 4000 DS and is the answer not in the manual?
General| Signal-to-Noise Ratio | 50dB |
|---|---|
| Total Harmonic Distortion | 1.5% |
| Type | Stereo Tape Deck |
| Track System | 4-Track, 2-Channel |
| Tape Speed | 3.75 ips / 7.5 ips |
| Reel Size | 7-inch |
| Heads | 1 x Erase |
| Frequency Response | 30 Hz |
| Wow and Flutter | 0.15% (7.5 ips) |
| Output | Line Out |
| Inputs | Line In |
| Outputs | Line Out, Headphones |
| Semiconductors | Transistors and Diodes |
Ensuring correct pinch wheel alignment and pressure for optimal tape performance.
Adjusting friction on the supply reel shaft for proper tape tension.
Adjusting the vertical position of heads relative to the tape path.
Ensuring heads are perpendicular to the tape surface.
Aligning heads for maximum output across frequency ranges.
To Next Page
