Need help?Do you have a question about the Akai 4000DS Mk-II and is the answer not in the manual?
General| Type | Reel to Reel |
|---|---|
| Track System | 4-track, 2-channel, stereo/monaural system |
| Signal to Noise Ratio | 50dB |
| Reel Size | Up to 7 inch reel |
| Total Harmonic Distortion | 1.5% |
| Output | 0.775V (line) |
| Tape Speed | 3.75 & 7.5 ips |
| Heads | 1 x erase |
| Input Sensitivity | 50mV (line) |
| Semiconductors | 6 x Transistors |
| Inputs | Line |
| Outputs | Line |
Details tape speed, wow/flutter, and rewind times for optimal tape handling.
Covers frequency response, SNR, distortion, crosstalk, and erase ratio for audio quality.
Lists input/output levels, bias, components, power, and physical dimensions.
Describes measurement procedures for key performance parameters like speed and audio quality.
Details methods for evaluating audio quality and erase performance.
Provides visual instructions for taking apart the tape transport unit and amplifiers.
Covers critical tension and alignment settings for tape handling mechanisms.
Details adjustments for tape tension and recording/playback mode switching.
Explains precise alignment for optimal audio reproduction and tape path.
Details setting audio input and output levels for accurate performance.
Covers critical settings for recording bias and erase head voltage.
Illustrates component placement on the Pre-Amplifier P.C. Board (LE-5022).
Shows component placement on the Oscillator & Power P.C. Board (LE-5021).
To Next Page
