Akai A58002 User Manual

TOMORROWS TECHNOLOGY TODAY TOMORROWS TECHNOLOGY TODAY
76
USING YOUR APPLIANCE
USING YOUR APPLIANCE
CARE AND MAINTENANCE
1. ALWAYS DISCONNECT THE EQUIPMENT FROM THE POWER SUPPLY BEFORE CLEANING.
2. CLEAN THE EQUIPMENT WITH A SOFT, DAMP, LINT FREE CLOTH.
3. DO NOT USE ABRASIVES OR HARSH CLEANERS.
SETUP
• Take out the tower body and tower
base carefully from the box.
• Take out the accessories of 7pcs
screws.
• Fit the base with the body with the
4 holes.
• Screw the base into the body by
screw driver with the 7pcs screws.
• Put the tower standing on the
oor.Itisnowredytouse.
• If the iPad is docked, please insert
the detachable holder to hold the
iPad.
POWER
Plug the attached AC cord into a standard AC power outlet to the power of
Tower
VIDEO OUTPUT FROM AN IPHONE/IPOD /IPAD
1. Connect the unit to a television using the Composite video output .
2. On your iPod/iPhone/ iPad ,navigate to VIDEOS >VIDEO SETTINGS or by
pressing MENU on Remote and turn TV OUT to “On” .
3. Follow the instruction for Docking an iPhone / iPod / iPad on this page .
4. Dock the iPod/iPhone/iPad onto this unit and begin playing a video from
the docked iPhone/iPod/iPad .
DOCKING AN IPHONE /IPOD /IPAD
1. Press the Power to turn the unit on.
2. Press the function to switch to iPhone /iPod /
iPad mode (iPod button on the remote )
3. Connect the iPhone iPod / iPad to the connector
inside the dock for iPhone / iPod /iPad .When
the unit is plugged in ,using AC power ,the
docked iPhone/iPod/iPad will charge .
4. Note:If the iPad is docked ,please insert the
detachable holder to hold the iPad .
PLAYING AN IPHONE/ IPOD /IPAD
1. Follow the instruction for docking an iPhone/ iPod /iPad .
2. Press the PLAY /PAUSE button to begin playing music from the docked
device
3. Press the PLAY /PAUSE button to begin playing the docked device
AUX-IN 2 (AUXILIARY INPUT RCA TYPE)
Requires an RCA cable (not included)
1. Connect an RCA cable to AUXILIARY INPUT .Connect the other end of the RCA
cable to the audio output on a DVD player ,stereo system ,gaming system
,television ect .
2. Press the POWER button to the unit on.
3. Press the FUNCTION button switch to Aux-in button on remote by pressing
twice .
4. Use the native controls on the connected device to begin playing audio routed
through the unit .
USING BLUETOOTH
1. Press the “Function” key and set to “AUX1” to activate the Bluetooth.
2. TheBluetooth/AUX1LEDwillashgreen&red,whichindicates“Searching”status.Ifthe
Bluetooth of the previously paired device is On, it will connect automatically with iTower.
3. If not, the LED will turn to red, which indicates that iTower has detected a device and then the
device can be paired with iTower.
4. The name and password is “‘AKAI A58002” and “0000” respectively. Input password if
necessary during pairing.
5. Once, the device is paired iTower, desired music can be played using the external (paired)
device via Bluetooth through iTower.
6. If it still doesn’t work, please re-start the unit or turn off the Bluetooth of paired cellphone, and
follow above steps again.
AUX-IN 1 (LINE IN TYPE)
Requires an 3.5mm cable (cable included )
1. Connect an 3.5mm cable to Aux-in 1 Jack .Connect the other end of 3.5mm
cable to an MP3 player or other audio source.
2. Press the power button to turn the unit on.
3. Press the function button to switch to Aux-in 1 mode .(Aux button on the
remote by pressing one time )
4. Use the native controls on the connected device to begin playing audio routed
through the unit .
A58002.indd 6-7 21/05/2013 16:42

Akai A58002 Specifications

General

Brand	Akai
Model	A58002
Category	Speakers
Language	English