12
TROUBLESHOOTING THE APPLIANCE
PROBLEM POSSIBLE SOLOUTION
The Jumbo Alarm
Clock Radio is not
turning on.
Check the power adaptor is correctly connected at both ends.
There is no sound
whilst in Radio
Function
Check that the volume has been correctly adjusted.
Check that the Clock is correctly set to Radio Mode.
Check other radio stations.
Crackling whilst in
radio mode.
Generally caused by a weak signal.
Try adjusting the position of the antenna cable.
Try a different radio station with better reception.
Alarm does not
function.
Ensure that the Alarm time and frequency has been set
correctly.
Ensure that the Alarm has been correctly activated.
Increase the radio volume.
Ensure the radio has been tuned correctly to a station.
The Jumbo Alarm
Clock Radio did not
save original time
during a power
outage.
Change the back-up battery.
TROUBLESHOOTING THE APPLIANCE
To Next Page
Loading...
Need help?
General
