Akai A61019 User Manual

8
4: Set on Thursday only
5: Set on Friday only
6: Set on Saturday only
7: Set on Sunday only
5. The next part of the process repeats
steps 2-4 however, for Alarm 2. You
will notice that the Alarm 2 LED
indicator will be ashing to indicate
this. Please repeat the process from
steps 2-4 inputting the correct details
for Alarm 2. Once you have completed
this your settings for Alarms 1 and 2
will be saved.
TURNING THE ALARM ON / OFF
1. To turn the Alarm ON (once you have
followed the previous instructions
to set the alarms), you need to rst
determine which alarm you want to
activate (Alarm 1 or Alarm 2) and
ensure that the Jumbo Alarm Clock
Radio is in normal mode (i.e. the
radio is NOT on). If the radio is ON,
the Alarm 1 and Alarm 2 buttons will
function as volume increase/decrease
buttons.
2. The Alarm can be set to sound as
a BUZZER or as the LAST RADIO
STATION PLAYED. If you set the
alarm to BUZZER, your alarm will
sound as a series of BEEP’s when it is
activated. If you set your Alarm to the
LAST RADIO STATION PLAYED, when
your alarm sounds, it will simply turn
on your radio to the last radio station
played.
TO SET THE ALARM TO BUZZER
1. The ‘-’ button is the Alarm 1 button.
To activate Alarm 1, press the
‘-’ button repeatedly until ‘bb’ is
displayed on screen. Wait a few
seconds until the clock reverts back
to the current time and you will notice
that the Alarm 1 LED indicator is
illuminated, this indicates that Alarm
1 is on.
2. The ‘+’ button is the Alarm 2
button. To activate Alarm 2, press
the ‘+’ button repeatedly until ‘bb’
is displayed on screen. Wait a few
seconds until the clock reverts back
to the current time and you will notice
that the Alarm 2 LED indicator is
illuminated, this indicates that Alarm
2 is on.
TO SET THE ALARM TO LAST RADIO STATION
PLAYED
1. The ‘-’ button is the Alarm 1 button.
To activate Alarm 1, press the ‘-’
button repeatedly until the frequency
of the last radio station played is
displayed on screen. Wait a few
seconds until the clock reverts back
to the current time and you will notice
that the Alarm 1 LED indicator is
illuminated, this indicates that Alarm
1 is on.
2. The ‘+’ button is the Alarm 2 button.
To activate Alarm 2, press the ‘+’
button repeatedly until the frequency
of the last radio station played is
displayed on screen. Wait a few
seconds until the clock reverts back
to the current time and you will notice
that the Alarm 2 LED indicator is
illuminated, this indicates that Alarm
2 is on.

Akai A61019 Specifications

General

Brand	Akai
Model	A61019
Category	Clock Radio
Language	English