12
● To view a specic title of a DVD, press the TITLE button (24). Use the
arrow buttons to select the title.
● To select the audio language of a DVD, press the AUDIO button (41)
repeatedly until the desired language is set.
● To switch on the subtitles of a DVD, press the SUBTITLE button (22).
To switch off the subtitles of a DVD, press the SUBTITLE button (22) again.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the DISPLAY button (43).
● To select the camera angle, press the ANGLE button (23).
● To return to the main menu, press the MENU button (42).
i
● Normally, if an MP3 disc is loaded, the unit will take longer time to read
the initial data.
● A DVD that does not match the region code cannot be read by this
appliance.
● If a disc contains mixed content (e.g. MP3 and video les), the appliance
will only recognise, list and play one content type.
● The screen saver becomes active if no disc has been loaded for
3 minutes, or if the appliance has been in STOP mode for 3 minutes.
Using the PROGRAM function
● Press the PROGRAM button (30) to enter the PROGRAM function.
● Press the digit buttons (21) to select a desired track, and use the arrow
button down (25) to highlight the next entry.
● To conrm the selection and start the program, move the highlight to
"START" and press the ENTER button (26).
● To stop the progam, press the PROGRAM button (30) and press the
ENTER button (26).
Using the ZOOM function
This function can be used for zooming in and out on photos and DVDs.
The available zoom ratios are: 2x, 3x, 4x, 1/2, 1/3, 1/4.
● Press the ZOOM button (31).
● Press the ZOOM button (31) again to set the correct size.
● Press the arrow buttons to move through the picture.
To Next Page
Loading...
Need help?
General
