16
Troubleshooting7.
Trouble Action
No sound or incomplete audio Check if the random equipment are switched on and
set correctly.
Check cables for connection problems.
Check if the correct source is selected.
Check volume or mute setting.
No power Check if the power cord has been properly
connected to the power outlet.
Check if the master power switch on the side panel
is ON.
Malfunction Should the appliance develop a serious malfunction,
unplug the appliance for 30 minutes. After this,
power on the appliance and restore to factory
default.
DVD/CD
Trouble Action
No playback There is no disc inserted. Load a disc in the appliance.
Disc is loaded upside down. Place the disc with the
label facing upward.
Rating level of the disc is higher than the rating level
setting of the appliance.
Invalid region code.
Incorrect type of disc.
Disc may be damaged or dirty, clean the disc or try
another disc.
Moisture may have condensed inside the appliance.
Remove the disc and leave the appliance powered
on for one or two hours.
No sound or incomplete audio Select another audio track.
During SCAN, SLOW MOTION or SINGLE STEP
the sound is muted.
Check if the disc is in fast forward or fast rewind
mode. Press the PLAY/PAUSE button (40).
To Next Page
Loading...
Need help?
General
