13
ACVDS955
Using the MP3/MPEG4 playback function
● Insert an MP3/MPEG4 disc. A content menu will display on the TV screen.
● Press the up/down arrow buttons (25) to select a folder or a le.
● Press the ENTER button (26) to enter the selected folder or le.
● Press the PROGRAM button (30) to switch between folders and les.
Press the ENTER button (26) to conrm.
Using the JPEG playback function
● Insert a JPEG disc. A content menu will display on the TV screen.
● Press the up/down arrow buttons (25) to select a folder or a le.
Press the ENTER button (26) to start the slide show.
● Press the PLAY/PAUSE button (40) to hold the slide show at the current
picture.
● Press the PLAY/PAUSE button (40) to resume the slide show.
● Press the PREV button (34) or the NEXT button (35) to select the
previous or next picture.
Using the Video CD playback function
● Press the PBC button (42) to switch on the playback function.
● Insert a Video CD.
● To start playback, press the PLAY/PAUSE button (40) once.
● To select the audio channel during Video CD playback, press the AUDIO
button (41).
● Press the PBC button (42) to quit the playback and return to the main menu.
DVD setup menu operation5.3
i
This menu only works in DVD mode.
To change the initial settings
The following actions have to be carried out with the remote control.
● Press the SETUP button (27).
● Press the arrow buttons (up and down) (25) to select a menu.
The submenu is displayed directly.
● Press the arrow buttons (left and right) (25) to enter the submenu.
● Press the ENTER button (26) to select a setting, or the left arrow button
to cancel the selection. If the selection invokes a subsequent submenu,
repeat the previous steps to select a setting.
To Next Page
Loading...
Need help?
General
