7
ACVDS955
Connecting to a power source3.2
Connecting to the mains
For this connection the AC/DC adaptor + cable has to be used.
● Connect the adaptor plug on the adaptor cable to the DC IN 9-12 V
connection.
● Connect the mains plug to a wall socket.
Cordless operation3.3
The appliance can also be operated cordless. For this purpose, the appliance
uses an internal battery pack. The battery pack has to be charged rst.
i
Whilst the appliance is connected to the power source, its battery
is charged automatically. When the battery is fully charged, the
charging process is completed.
Remote control3.4
Installing the battery
● Press the catch and at the same
time pull out the battery tray.
● Insert 1 lithium battery, type CR2025
3V battery with the stamped (+) mark
facing upward.
● Insert the battery tray into the
remote control.
To Next Page
Loading...
Need help?
General
