6
After Sales Support
1300 886 649 | info@tempo.org
Indoor unit (Fig. 1)
1 Front panel
2 Air filter
3 LCD display and
signal receiver
4 Louvres
5 Supply cord
6 Remote controller
Outdoor unit (Fig. 2)
7 Drain hose
8 Refrigerant gas/
liquid pipe
9 Cut-off valve
10 Air outlet cover
This Fixed Speed Reverse Cycle Split System Air Conditioner is made up of
an indoor and outdoor unit and a remote control (Fig. 1 & 2). The two units
are connected through properly insulated copper pipes (not supplied) and an
electrical connecting cable.
The indoor unit is installed on a wall of the room to be air conditioned.
The outdoor unit is installed outdoors on the ground, or on a wall on suitable
brackets.
Product Overview
To Next Page
Loading...
Need help?
General
