13
After Sales Support
1300 886 649 | info@tempo.org
Remote Control Operation (Cont.)
Buttons Descriptions (Remote Control: Inside)
1 ON/OFF button
• Press this button to start of stop operation.
Note: Pressing this button will clear any previously set functions, such as
the timer or sleeping function.
2 MODE button
• Press this button to select the operation mode, as follows:
3 SPEED button
• Press this button to select the fan speed, as follows:
4 TURBO button
This function is design to produce maximum cooling or heating
performance. It only works in COOL or HEAT mode and cannot be set in
AUTO, DRY or FAN mode.
• In COOL or HEAT mode, press this button to set Turbo operation on;
“TURBO” will appear on the display. Press the button again to stop
turbo speed; “TURBO” will disappear on the display.
• Once energised, the unit will default to turbo off.
Note: When this function is selected, the room temperature is not
controlled automatically, so if the room temperature drops or rises too
much, please cancel the Turbo operation.
5 SILENCE button
• Press press this button to set silence on; “SILENCE” will appear on
the display. Press the button again to stop silence; “SILENCE” will
disappear on the display.
• Once energised, the unit will default to silence off.
To Next Page
Loading...
Need help?
General
