17
After Sales Support
1300 886 649 | info@tempo.org
Operation Modes
Automatic Mode
In this mode the unit automatically adjusts the temperature according to
the room temperature to ensure and maintain comfortable conditions. The
temperature is automatically set to 24°C.
• Press the MODE button to select Auto mode.
• Press the SPEED button to select the fan speed from the following
options: LOW, MID, HIGH, AUTO.
• Press the ON/OFF button to start operation. 24 will be displayed on the
wall unit display and the air conditioner will start working in Auto mode:
it will cool, heat or dry the room automatically, depending on the current
room temperature, as illustrated below:
Ambient temp. Operation mode Auto temp.
< 20°C Heating 24°C
20°C ~ <27°C Drying 24°C
>27°C Cooling 24°C
• Press the ON/OFF button to stop the air conditioner.
Cooling / Heating Mode
In Cooling or Heating mode the air conditioner will cool down or heat up the
room to the set temperature and reduce the humidity in the air at the same
time.
• Press the MODE button repeatedly until the desired operation mode
(Cooling or Heating) is selected.
• Press the
/
button to set the temperature, in one degree steps, from
16°C to 32°C.
• Press the SPEED button to select the fan speed from the following
options: LOW, MID, HIGH, AUTO.
• Press the ON/OFF button to start operation in Cooling or Heating mode.
• Press the ON/OFF button to stop the air conditioner.
To Next Page
Loading...
Need help?
General
