● Press the ENTER button (27) to select a setting, or the left arrow button to
cancel the selection.
● Press the SETUP button (25) to store the settings and exit.
General setup page
● In the TV DISPLAY section, press the arrow buttons to choose 4:3
Pan Scan, 4:3 Letterbox or 16:9.
● In the OSD LANGUAGE section, press the arrow buttons to choose the
language.
● In the SCREEN SAVER section, press the arrow buttons to switch the
screen ON or OFF.
Audio setup page
SPDIF SETUP
SPDIF OUTPUT
● Select SPDIF OFF to switch off the digital audio signal output.
● Select SPDIF RAW to set the digital audio signal output to its raw format
(DTS/Dolby Digital 5.1).
● Select SPDIF PCM to set the digital audio signal output to PCM format.
DOLBY DIGITAL SETUP
DUAL MONO
● Stereo: both channels as is. STEREO is the default setting.
● L-Mono: left channel only.
● R-Mono: right channel only.
i
This function is only available for Dolby AC-3 encoded 2-channel
discs.
3D PROCESSING
REVERB MODE
Select (OFF/CONCERT/LIVINGROOM/HALL/BATHROOM/CAVE/ARENA/
CHURCH) to create a virtual surround sound.
HDCD
FILTER
● Select the value for full sound richness of HDCD-encoded CDs.
To Next Page
Loading...
