AUDIO SYNC
● Set the delay time when the image and the sound cannot be played at the
same time (0 ~ 200 ms).
Video setup page
COMPONENT
● Select S-VIDEO if the S-VIDEO connection is used to connect the
appliance to the TV.
● Select Pr/Cr-Y-Pb/Cb if the COMPONENT connection is used to connect
the appliance to the TV.
i
● The composite video output is the default setting for video output.
TV MODE
● Select PROGRESSIVE to send the video output in progressive signals.
● Select INTERLACE to send the video output in interlaced signals.
QUALITY
● Select SHARPNESS to adjust the screen sharpness (High/Medium/Low).
● Select BRIGHTNESS to adjust the screen brightness (-20 ~ +20).
● Select CONTRAST to adjust the screen contrast (-16 ~ +16).
● Select GAMMA to adjust the colour intensity (High/Medium/Low/None).
● Select HUE to adjust the screen hue (-9 ~ +9).
● Select SATURATE to adjust the screen saturation (-9 ~ +9).
● Select LUMA DELAY to compensate the delay in the colour signal (OT/1T).
HDMI SETUP
● Set HDMI to Auto to enable HDMI output automatically.
● Select RESOLUTION to adjust the resolution (480p(60Hz)/720p(60Hz)/
1080i(60Hz)/1080p(60Hz)/576p(50Hz)/720p(50Hz)/1080i(50Hz)/
1080p(50Hz)).
Preference setup page
i
The general system functions can only be set with an empty DVD
player.
TV TYPE
● Select the video output format to match the appliance to the TV system:
PAL/MULTI/NTSC.
To Next Page
Loading...
