Akai AP-005

Condition
Explanation
7. Does not
repeat. (lead-in
operates
normally.)
Confirmation
Source
Countermeasure
. With cut knob set to REPEAT,
check leaf-switch lead-through
with tester.
Faulty contact.
Replace leaf-switch.
. Cut knob cannot be set to
REPEAT.
8. Cannot
manually
manipulate.
Variation in shape of
plate-spring or damaged.
Repair plate-spring
Replace plate-spring.
. When pick-up arm is moved to
the vicinity of the outer
circumference of a 30 cm
record, Plate Manual-B does not
properly drop from pick-up arm
plate assembly.
Faulty installation
position of pick-up plate
assembly.
Adjust installation
position.
. Manual-Plate-B does not operate
smoothly.
Operation of
Manual lifter
faulty.
(at record
performance)
1. Lifter does
not work when
set to DOWN
position.
Variation in shape of or
faulty installation of
Manual-Plate-A or B.
Repair or replace
Insufficient oil inside cylinder.
Insufficient oil.
Replace lifter assembly.
2. Does not
operation when
lifter is brought
up or down.
Check lifter plate.
Check plate spring.
Variation in shape or
bent.
Variation in shape of or
faulty installation.
Repair or replace
Repair or replace or
properly install
17