Akai AP-Q55

Il. TECHNICAL DATA
1. MODEL AP-D33/C
TURNTABLE
DRIVE SYSTEM & MECHANISM
Aluminum alloy diecast
Direct Drive, Auto-return
MOTOR
DC Servo Motor
SPEED & PITCH CONTROL
SPEED DEVIATION
WOW AND FLUTTER
33-1/3, 45 rpm + 5%
Less than + 0.003%
0.05% (DIN) 0.035% (JIS)
RUMBLE
TONE ARM
45 dB (DIN A)
70 dB (DIN B)
S-shaped Static Balanced
EFFECTIVE ARM LENGTH 220 mm
STYLUS PRESSURE ADJUSTMENT RANGE 0 to 3 grams
APPLICABLE CARTRIDGE WEIGHT’ 4 to 12 grams
ARM LIFTER Oil damped
OVERHANG 15 mm
OFFSET ANGLE 22°30’
HORIZONTAL TRACKING ERROR ANGLE +3°5’, -1°13'
SHELL WEIGHT 8.2 grams
CARTRIDGE VM (Dual Magnet) type
OPTIMAL STYLUS PRESSURE
OUTPUT VOLTAGE
CHANNEL SEPARATION
FREQUENCY RESPONSE
STATIC VERTICAL COMPLIANCE
STATIC HORIZONTAL COMPLIANCE
POWER REQUIREMENTS
POWER CONSUMPTION
DIMENSIONS
WEIGHT
(Model AP-D33 does not include cartridge)
2 grams
5 mV (DIN)
More than 20 dB (DIN)
0 dB at 1 kHz, + 2 dB at 10 kHz
17.7 x 10°° cm/dyne
29.1 x 10°° cm/dyne
100V, 50/60 Hz for Japan
120V, 60 Hz for USA and Canada
220V, 50 Hz for Europe except UK
240V, 50 Hz for UK and Australia
110—120V/220—240V, 50/60 Hz switchable for other countries
SW
440(W) x 140(H) x 403(D) mm
(17.3 x 5.5 x 15.8 inches)
5.5 kg (12.1 Ibs)
* For improvement purposes, specifications and design are subject to change without notice.
10
|
;
|
!