5.3. CD functions
To insert a CD:
Press the CD compartment (6) to open the appliance
Insert the CD with the label upwards
Close the CD compartment (6)
Playing a CD:
To select the CD function, slide the FUNCTION switch (1) to the CD position.
To start playback, press the PLAY/ PAUSE button (15) once.
During playback, the following functions are available:
To select a track, press the PREV button (13) or the NEXT button (16) until the desired track is set.
To search for a specific point on the disc, hold the PREV button (13) or the NEXT button (16) until the point
is reached and release the button.
To pause playback, press the PLAY/PAUSE button (15) once; to resume playback, press the button again.
To stop playback, press the STOP button (14).
Hold down the button 10+/F+ (12) to go to the following 10 numbers.
Press the button 10+/F+ (12) to select the next folder on an MP3 disc or a USB flash drive
To Next Page
Loading...
