Using the REPEAT function
To repeat the current number, press the button PROG/REP (17) until the icon (A) appears on the display.
To repeat all numbers, press the button PROF/REP (17) until the icon (B) appears on the display.
(Only for MP3) To repeat all the numbers in one folder, press the button PROF/REP (17) until the icon (B)
and the icon FOLDER appear on the display.
To shut off the function REPEAT press the button PROG/REP (17) until no REPEAT icon is visible anymore.
Using the PROGRAM function
To use the PROGRAM USB/MP3 function for USB, the playback must be in STOP mode.
To play a list of tracks (max. 20) in a program, press the PROG/REP button (17).
P01 appears on the display.
Press the button 10+/F+ (12) to select the desired folder.
Press PROG/REP (17) to confirm.
Press the PREV (13) button or the NEXT (16) button to select the desired file.
Press PROG/REP (17) to confirm.
Press the PROG/REP button (17) to confirm the selection. Repeat the previous step to select more tracks
and confirm every selection with the PROG/REP button (17).
Press the PLAY/PAUSE button (15) to start the program.
To stop playback, press the STOP button (14).
To delete the program during the playback, press the STOP button (14) twice.
To remove the device, gently pull it out of the slot.
To Next Page
Loading...
Need help?
General
