6.Cleaning and maintenance
WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance.
Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly
with water and a neutral solution.
6.1. Handle and care of a disc
Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc
surface.
Do not bend or press the disc. Do not expose the disc to direct sunlight or heating sources.
Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently, radially, from centre
towards the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning fluids will
permanently damage the disc surface.
To Next Page
Loading...
Need help?
General
