Akai APRC90AT User Manual

5.5. AUX IN
 To select the AUX function, slide the FUNCTION switch (1) to AUX.
 Connect the external appliance to your APRC90AT (9).
AUX (11) appears on the display.
5.6. Auto Power System (APS)
The Auto Power System (APS) is intended to save energy. In the following situations, the device will go into
Standby mode after 15 minutes:
 The FUNCTION (1) switch is in the CD/MP3 position and there is no CD in the CD compartment, or the CD
has finished playing.
 The FUNCTION (1) switch is in the USB position and there is no USB drive in the USB port, or the USB
drive has finished playing.
 The FUNCTION (1) switch is in the AUX position and there is no AUX cable connected.

Akai APRC90AT Specifications

General

Brand	Akai
Model	APRC90AT
Category	Stereo System
Language	English