Akai CR-80-SS User Manual

PRECAUTIONS
Model CR-80-SS (CR-80D-SS) is constructed of the finest
materials and with proper care will bring you many, many
hours of musical listening pleasure. We, therefore, strongly
urge you to read this manual thoroughly before attempting
operation.
The conditions listed below do not indicate mechanical failure
of your unit. If your machine exhibits any of these conditions,
please take the indicated action:
1. Loss of sensitivity and tone quality
* Dirty Erase Head (Clean erase head)
* Dust adhering to recording/playback head (Clean
recording/playback head)
* AC power lower than the voltage to which your
machine is adjusted (Check voltage input and
adjust).
2. Machine will not record (play)
* Check positions of controls and plugs and posi¬
tion of Input Selector Switch.
The following notes are provided for your convenience:
1) The use of new tapes will result in the best recordings.
2) Should your machine need service, take it to your nearest
authorized AKAI Service Agent or inquire at the Service
Department of AKAI Company, Tokyo Japan.
3) Your machine needs constant voltage for optimum perfor¬
mance.
4) In recording, if the sound sources are so far away from the
microphones that the volume controls must be turned up
to maximum, some hum or noise will inevitably be
recorded. A test recording is recommended before at¬
tempting a final recording.
5) Insert cartridge properly (if up-side-down your recorder
will not operate).
6) Although the motor of Model CR-80-SS (CR-80D-SS) is
sufficiently oiled for prolonged use, for maximum service
and optimum performance, take your machine to your
local authorized AKAI service agent for occasional lubri¬
cation.
7

Akai CR-80-SS Specifications

General

Brand	Akai
Model	CR-80-SS
Category	Measuring Instruments
Language	English