Need help?Do you have a question about the Akai X-360D and is the answer not in the manual?
General| Head Configuration | 1 x erase, 1 x record, 1 x playback |
|---|---|
| Total Harmonic Distortion | 1.5% |
| Type | Reel-to-Reel Tape Recorder |
| Track System | 4-track, 2-channel stereo |
| Reel Size | Up to 7 inch reel |
| Frequency Response | 30Hz to 22kHz (7.5 ips) |
Proper adjustment of head height and azimuth for optimal performance.
Detailed steps for adjusting playback and recording heads.
Procedure for adjusting erasing and bias heads.
Setting the pre-amplifier output level.
Calibrating the VU meter sensitivity.
Adjusting the main amplifier for proper output.
Aligning the capstan drive belt for proper operation.
Adjusting pinch roller solenoid position and pressure.
Adjusting brake solenoid, band, and tension.
Measuring and adjusting tape tension for various modes.
How the magnetic brake functions to stop the tape.
Sequence of events when the REVERSE button is pressed.
Troubleshooting for common problems with tape transport.
Troubleshooting for playback and recording system problems.
To Next Page
