Akai GXC-750D

І. TECHNICAL БАТА
-一
一-
TRACK SYSTEM
4 Track, 2 channel stereo system
TAPE
Philips type cassette tape
TAPE SPEED
1-7/8 ips
WOW & FLUTTER
Less than 0.06% WRMS. 0.17% (DIN 45500)
FREQUENCY RESPONSE
35 to 15,000 Hz 23 dB at LN position
35 to 15,000 Hz +3 dB at LH position
35 to 16,000 Hz +3 dB at СТО, position
35 to 18,000 Hz +3 dB at FeCr position
DISTORTION
Less than 1.0% at LH position
Less than 1.5% at СТО; position
Less than 1.5% at FeCr position
| Less ал 1.0% at LN position
“SIGNAL TO NOISE RATIO
Better than 56 dB at CrO, position (DIN 45500)
Dolby NR switch ON: Improves up to 10 dB above 5 kHz
ERASE RATIO
Better than 70 dB
BIAS FREQUENCY
100 kHz
HEADS
3 head system (опе GX recording/playback head-and one erase head)
MOTORS
Е.Е. & REWIND TIME
3
motor
system
(one
DC
FG
servo
motor
for
capstan
drive
and
two
DC
motors
for
reel
drive)
60
sec.
using
a
C-60
Tape
s
OUTPUT JACKS
Line (2): 410 mV (0 VU) e
Required load impedance: more than 47 kohms
Phone (1): 100 mV/8 ohms
INPUT JACKS
Required microphone impedance: 600 ohms
Line (2): 70 mV (input impedance 100 kohms)
Е (2): 0.25 mV (input impedance 2.4 kohms)
SEMICONDUCTORS
- | Transistors: 75, Diodes: 124, FETs: 4, ICs: 18
POWER REQUIREMENTS
120V/60 Hz for U.S.A. & Canada
240V/50 Hz for Australia, 100V, 50/60 Hz for Japan
110—120V/220—240V, 50/60 Hz for other countries
DIMENSIONS 440(W) x 318 x 157(D) mm
(17.3 x 12.5 x 6.2) inches
WEIGHT 9.5 kg (21.0 Ibs)
NOTE: Standard reference tapes
LN position:
LH position:
CrO, position:
FeCr position:
AKAI C-60LN, FUJI FL C-60
MAXELL UD C-60
TDK SA C-60
SONY Duad C-60
*
For
improvement
purposes,
specifications
and
design
are
subject
to
change
without
notice.
*
"Dolby"
and
the
Double
D
symbol
are
trademarks
of
Dolby
Laboratories.
(Manufactured
under
license
from
Dolby
Laboratories.)