Fade Out
This function sets an automatic fade Out between the in and out point of
the selected section.. The following fade types are available:
Linear Fade Out
This selection fades out the audio
with a linear curve. A linear curve
will go from start to end with no
curve, creating a straight line.
Logarithmic Fade Out
This selection fades out the audio
with a Logarithmic curve. A
logarithmic curve will quickly lower,
and then even out for the middle
section, lowering quickly again as it
nears the end.
Exponential Fade Out
This selection fades out the audio
with an Exponential curve. An
exponential curve will slowly lower
in the beginning, and then quickly
lower for the middle section, and
then slowing again as it nears the
end.
[F4] (CANCEL) / [F5] (DO IT)
Press [F4] (CANCEL) to abort the Fade In operation. Press [F5] (DO IT) to apply the change.
To Next Page
Loading...
