Try experimenting further with the Arpeggiator, along with latching. You will find the Arpeggiator a powerful addition to the live performance aspect
of the MPC5000.
Using the Arpeggiator with Pre-Recorded Tracks
The Arpeggiator can also be used with previously recorded sequencer tracks. To do so, do the following:
01. Select a track in the current sequence with previously recorded data.
For best results, use a synth or MIDI program rather than a Drum type program.
02. Press the [ARP ON/OFF] button.
03. The recorded data on the selected track will now play in an arpeggio pattern.
To Next Page
Loading...
