English - 19
2
Plug the combiner into
the “ANT 1 IN (Air)”
terminal on the rear
panel.
INSTALLATION
Antennas with 75-ohm Round Leads
Plug the antenna lead
into the “ANT 1 IN (Air)”
terminal on the rear
panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires a
an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
BP68-00516A-01 (P62A_Akai_Eng) 7/5/05 1:08 PM Page 19
To Next Page
Loading...