English - 20
INSTALLATION
Cable with a Cable Box that Descrambles All Channels
1
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box.
2
Connect the other end of
this cable to the “ANT 2
IN (Cable)” terminal on
the rear panel.
œ This terminal might be labeled
“ANT OUT”, “VHF OUT”, or
simply “OUT”.
Connecting Cable TV
You can connect different cable systems to your TV, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
If you want to connect cable, and you do not need to use a cable box:
Plug the incoming cable
into the “ANT 2 IN
(Cable)” terminal on the
rear panel.
BP68-00516A-01 (P62A_Akai_Eng) 7/5/05 1:08 PM Page 20
To Next Page
Loading...