English - 25
Connecting a Digital TV Set-Top Box
Connecting to DVI (Digital Visual Interface)
By inputting a high-bandwidth Digital Content Protection high-definition picture source
to the DVI INPUT jack on the TV, high-definition pictures can be displayed on the
screen in their digital form.
INSTALLATION
Notes
• The DVI INPUT jack is not compatible with the picture signal of a personal computer.
• Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a
DTV decoder.
1
Connect a set of audio cables between the “DVI IN
(AUDIO) (L, R)” jacks on the TV and the AUDIO OUT
jacks on the Set-Top Box.
2
Connect a video cable between the “DVI IN
(VIDEO)” jack on the TV and the VIDEO OUT jack
on the Set-Top Box.
TV Rear Panel
DVI Cable
Audio Cable
DTV Set-Top Box
From Cable or
From Antenna
1
2
BP68-00516A-01 (P62A_Akai_Eng) 7/5/05 1:08 PM Page 25
To Next Page
Loading...